9.
Apply the water or liquid chemical so that it thoroughly covers the surface being
sprayed. NOTE: Make sure to read and understand the chemical manu-
facturer’s manual for mixing and application recommendations.
10.
When finished spraying, engage the Trigger Lock (11) to turn off the tool. Empty
the Tank (23) of its contents, making sure to replace the Cap (25) on the Tank.
Disengage the Trigger Lock and squeeze the Handle (11) to release any remain
ing pressure in the system. Then, engage the Trigger Lock (11) again to its
“OFF” position. (See Figures A and B.)
11.
NOTE: If spraying liquid chemicals, flush the interior and clean the exterior of the
Sprayer thoroughly with cleaning agents recommended by the chemical manu
facturer. Then, store the Sprayer and any chemicals in a safe, dry, location out of
reach of children and untrained users.
(See “Inspection, Maintenance, and Cleaning” section.)
INSPECTION, MAINTENANCE, AND CLEANING
1.
Before performing any inspection, maintenance, cleaning, or storing the
Sprayer, engage the Trigger Lock (11) to turn off the tool. Empty the Tank
(23) of its contents, making sure to replace the Cap (25) on the Tank. Disengage
the Trigger Lock and squeeze the Handle (11) to release any remaining pressure
in the system. Then, engage the Trigger Lock (11) again to its “OFF” position.
2.
Before each use: Inspect the general condition of the Sprayer. Check for mis-
alignment or binding of moving parts, cracked or broken parts, leaking Battery,
damaged Hose, and any other condition that may affect its safe operation. If
abnormal noise or vibration occurs, have the problem corrected before further
use. Do not use damaged equipment.
5.
Unscrew and remove the Cap (25) of the Tank (23). Fill the Tank with water or a
liquid chemical solution. Then, retighten the Cap onto the Tank. (See Figure B.)
6.
If desired, use the adjustble Shoulder Strap (24) to carry the Sprayer.
(See Figure B.)
7.
Hold the Handle (11) firmly with both hands, and point the Nozzle (2, 6) safely
toward the area that is to be sprayed. (See Figure A.)
8.
Pull the Trigger Lock (11) back to disengage and start the Sprayer.
(See Figure A.)
4.
Attach the Fan Nozzle & Nut (2)
or the Adjustable Nozzle & Nut (6) to the Wand
(5) of the Spray Gun (1). (See Figures B and C.)
SKU 92497 For technical questions, please call 1-800-444-3353 PAGE 10
