One for All URC-7562, Руководство пользователя

Страница: 13 / 58

W W W.ONEFORALL.COM
13
The Learning Feature
The ONE FOR ALL 6 comes with a complete library of preprogrammed
codes. After you have set up the ONE FOR ALL 6 for your device, you may
find that there are one or more keys that you had on your original
remote, which do not have a place on the ONE FOR ALL keypad.
As a convenience, the ONE FOR ALL 6 offers a special Learning feature that
allows you to copy any function from your original remote control onto the
keypad of the ONE FOR ALL 6.
To use the Learning feature, please follow the instructions below. Please
note, the "custom keys" A-H have been especially provided for this feature.
By using these keys, you will not have to sacrifice an existing function on
the ONE FOR ALL 6 keypad. (If you need to learn more than eight features
per mode (max. approximately 25 functions), you will need to place the
learned function on another key. Please see the next section entitled
Shifted Learning).
Before you start:
- Make sure your original remote control is working correctly.
- Make sure neither your ONE FOR ALL, nor your original remote control is
pointing at your device.
Example: To copy the “mono/stereo” function from your original TV
remote onto the A-key of your ONE FOR ALL 6.
1 Place both remote controls (the ONE FOR ALL 6 and your ori-
ginal) on a flat surface. Make sure the ends which you nor-
mally point at your device are facing each other. Keep the
remotes at a distance of 2 to 5 cm.
2 Press and hold the MAGIC key until the device key
blinks twice (the device key blinks once then twice).
3 Press 975 (the device key will blink twice).
4 Press the device key (on the ONE FOR ALL remote)
to select the mode to which you want to copy the learned
function
(Example: TV key).
5 Press the key (on the ONE FOR ALL remote) where
you want to place the learned function (Example: A
key). The device key will flash rapidly.
6 Press and hold the key (on your original remote)
that you want to copy until the device key on the ONE
FOR ALL blinks twice
(Example: “mono/stereo” key).
7 If you want to copy other functions within the same
mode, simply repeat steps 5 and 6 pressing the next key
you want to copy by learning.
8 To exit the learning mode, press and hold MAGIC until
the device key blinks twice.
9 Learning is mode specific. To access your learned function,
press the appropriate device key first.
A
TV
OFA 6 2004 (Uk,D,F) 16-03-2004 15:13 Pagina 13