4
Device Table
NOTE:
Please refer to the table below when performing
the instructions in “Programming Device Control” on
page 5.
After programming, this remote will be able to control
the following types of devices:
Device
Key
Controls These Types Of Devices
• DVD Player
• TV/DVD Player Combo
• VCR/DVD Player Combo
• VCR
• TV/VCR Combo
• TV/VCR/DVD Player Combo
• VCR/DVD Player Combo
• PVR (or DVR)
• Cable Box (or Converter)
• Cable Box/PVR (or DVR) Combo
• Satellite Receiver
• Satellite Receiver/PVR (or DVR) Combo
• Digital TV Converter
• Television
Installing Batteries
1. On the remote control’s back,
push the tab and lift off the
battery cover.
2. Obtain two (2) new AAA
alkaline batteries. Match the +
and – marks on the batteries to
the + and – marks in the battery
case, then insert the new
batteries.
3. Press the battery cover back
into place. The tab should click
when the cover is locked.
4. Test the remote control by
pressing any mode key (e.g.,
TV
). If the batteries are inserted
correctly, the LED (red light) will
blink.
NOTE:
When batteries need replacement, the remote
control will stop operating. Remove the old batteries
and insert new ones within 10 minutes to ensure all of
your programming information is restored.
