One for All 9910, Руководство пользователя

Страница: 25 / 66

RE-ASSIGNING DEVICE KEYS (continued)
To re-assign other device keys to the AUX key, repeat steps 1 through
6 on the previous page but substitute the key sequence from the
below chart:
To Re-Assign Device Key Perform Sequence
AUX
as 2nd TV key:
SET
*-
▼
(x 7) -
SELECT
-
TV
-
AUX
AUX as 2nd DVD key: SET *- ▼ (x 7) - SELECT - DVD - AUX
AUX as 2nd SAT key: SET *- ▼ (x 7) - SELECT - SAT - AUX
AUX as 2nd CD key: SET *- ▼ (x 7) - SELECT - CD - AUX
AUX as 2nd CBL key: SET *- ▼ (x 7) - SELECT - CBL - AUX
AUX as 2nd RCVR/AMP key: SET *- ▼ (x 7) - SELECT - RCVR/AMP - AUX
*NOTE: Press and hold
SET
(see step 1 on previous page).
You can also re-assign another unused device key by substituting an
open key for the
AUX key in the above chart and performing the
sequence. For example, to re-assign an unused SAT key as a second
CD key, perform SET *-
▼
(x 7) - SELECT - CD - SAT .
USING KEYMOVER
The URC-9910 remote control includes a Keymover feature that
allows you to map (or copy) keys from one mode (i.e., source mode)
to another mode (i.e., destination mode).
NOTE: The following keys cannot be used as a source or destination:
TV
,
VCR
,
DVD , AUX , SAT , CBL , RCVR/AMP , CD , HOME THEATER , and SET .
Programming Keymover
For example, if your VCR does not have volume control, try mapping
the volume and mute keys from
TV mode to VCR mode as follows:
1. On the URC-9910 remote control, press and hold
SET until you see the display change from the cur-
rent device and time to [CODE SET] .
NOTE: The device, its code, and time are examples. Your
remote control settings may be different.
NOTE: To exit programming at any time, press EXIT once or
allow 30 seconds of inactivity to lapse. You will see [EXIT
SETUP]
as the remote control returns to normal operation.
NOTE: [INVALID] means you have inadvertently pressed an
incorrect key. Note your error and continue programming.
2. Press the
▼
key eight times until you see the display
change to
[KEYMOVER]
.
(x 8)
38