18
Dual Mode IntelliPlug AVC014
SECTIONS
Table of Contents
1
2
4
5
Step 4 - Optional Remote Control Paring
The REMOTE SENSOR is capable of being paired to your remote control which prevents other remote controls,
lighting or sunlight unintentionally triggering the IntelliPlug into standby mode. Position your television remote control in
line with the SENSOR as illustrated on page 15. Ensure that the IntelliPlug is plugged into the mains and the power is on.
OPERATING THE INTELLIPLUG WITH THE REMOTE SENSOR
1
.
3
.Press and release the remote control power button a second time. The Sensor responds by the front LED
FLASHING YELLOW THEN GREEN ONCE.
4
.Press and release the remote control power a third time. The LED will illuminate GREEN for 3 seconds then extinguish.
2
.
Press and HOLD DOWN the button on the Sensor.
The Front LED will illuminate RED and the IntelliPlug
will temporarily activate, then the front LED starts to
FLASH YELLOW FAST
Press and Release the Power button on the Remote
Control. The Sensor LED responds by turning GREEN
Wait until the Green LED illuminates every few seconds
then release the button on the Sensor
SECTIONS
Table of Contents
1
2
3
4
5