Once AgriShift LCL-0.2-120V, Инструкция по установке и эксплуатации

Страница: 15 / 40

AgriShift
®
Lighting Control Unit MASTER - Model LCL-0.2
13
SE
CT
IO
N
3
Manual control switches offer three possible positions:
AUTO The output is automatically controlled accor-
ding to the current program or a setting on
the screen.
OFF The output is manually disabled.
ON The output is set on manual operating mode.
The intensity is set by the Manual Intensity
Adjustment Knob.
Control Switch
This button allows adju sting light intensity when one
or more control switches are set into the ON position.
Note: The manual intensity adjusment knob adjusts
both lighting outputs simultaneously if both are set on
manual mode (Control Switches in the ON position).
Manual Intensity
Adjustment Knob
3.2 CONTROLLER MENU AND OPTIONS
3.2.1 General - Lighting outputs state
Master controller LCL-0.2 allows controlling all lighting lines with a single
operating setpoint. This controller operates as follows:
The setpoint is applied to all lighting lines (of the master controller and slave
controllers) for which the switch is in the AUTO position. In the case of slave
controllers, the lighting setpoint is provided through the expansion
bus 0-10V.
The adjustment of the light intensity via the expansion bus 0-10 V is
performed solely by the options Output control, Timed Manual Override,
and Curve (defined in sections 4.6, 4.4.5 and 4.4.2 respectively).
3.1.4 Control Switches