UM
12070901
Shanghai ONBON Technology Co.,Ltd
BX-YQ3/YQ4/YQ2E controller User Manuel
18
5.4.
Scan Configuration
On
“
set screen parameters
”
window, click
“
scan configuration
”
:
In the scan mode, if the one in our software can not correspond with your module, you
need to do “smart scan”, Then you could choose it and set.
5.5.
Smart Scan configuration
Click “ Smart scan”, enter” Smart setup wizard-1”, check the picture below. You could set
module width, driver chip, scan point outlet, with or without138, cascade direction, etc.
You need to set it according to your modules.
