UM
12070901
Shanghai ONBON Technology Co.,Ltd
BX-YQ3/YQ4/YQ2E controller User Manuel
17
Step 1: Select the correct controller model, usually, if your connection is right, the PC
software could identify the controller model automatically, under this circumstance, you do
not need to select manually.please choice BX-YQ3 if you are using BX-YQ3
Step 2: Input the correct height and width pixels according to your screen.
Step 3: Select the correct communication mode and configure the correct interface
parameters. And IP address should be the same with the one you contribute to the
controller.
Step 4: Click “ set parameters” Now, you finished all the steps of set screen parameters.
You could check the screen now, it should show “ Add ” or something about it. You need
to check that the font showed on the screen is normal, if not, you need to reset the scan
mode.
