ON Semiconductor MT9P001I12STCH-B-GEVB, Руководство пользователя

Страница: 4 / 5

MT9P001I12STCH − B − GEVB
www.onsemi.com
4
Table 1. JUMPERS AND HEADERS (continued)
Jumper/Header No. Description Pins Jumper/Header Name
P20 CLK_SELECT
1 − 2 (Default) Master Mode on-board oscillator
2 − 3 Master Mode Demo 2X clock
P25 SADDR
1 − 2 (Default) I
2
C Address set to 0x90
2 − 3 I
2
C Address set to 0xBA
P33 OE_N 1 − 2 (Default) Parallel interface output
2 − 3 Non-parallel interface output
P34 TRIGGER Open (Default) External connection to snapshot trigger at Pin 2
P35 STANDBY 2 − 3 (Default) Set to Normal Mode
1 − 2 Set to Standby Mode
P37 FLASH Open (Default) External connection to snapshot flash at Pin 3
P40 ATEST 2 ATEST_BOT
3 ATEST_TOP
P41 VADCTEST 1 VADC_TEST_IN
2 VADC_TEST_N
3 VADC_TEST_P
SW3 RESET N/A When pushed, 240 ms reset signal will be sent to MT9P001
Interfacing to ON Semiconductor Demo 2X Baseboard
The ON Semiconductor Demo 2X baseboard has
a similar 26-pin connector and 13-pin connector which mate
with P9 and P36 of the headboard. The four mounting holes
secure the baseboard and the headboard with spacers and
screws.