ON Semiconductor MT9P001I12STCH-B-GEVB, Руководство пользователя

Страница: 3 / 5

MT9P001I12STCH − B − GEVB
www.onsemi.com
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the leftmost
side of the pin. Grouped jumpers increase in pin size with
each jumper added.
Figure 5. Pin Locations for a Single Jumper.
Pin 1 is Located at the Leftmost Side and Increases as it Moves to the Right
Pin 1 Pins 1 − 4
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2
Pins 3 and 4
Pins 5 and 6
Pins 7 and 8
Pins 9 and 10
Pin 1
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name Pins Description
P1 +2V8_VAA 1 − 2 (Default) Connects to on-board +2V8_VAA power supply
2 − 3 External power supply connection
P2 +2V8_VAAPIX 1 − 2 (Default) Connects to on-board +2V8_VAAPIX power supply
2 − 3 External power supply connection
P3 +2V8_VDDPLL
1 − 2 (Default) Connects to on-board +2V8_VDDPLL power supply
2 − 3 External power supply connection
P4 +VDDIO
1 − 2 (Default) Connects to on-board +VDDIO power supply
2 − 3 External power supply connection
P5 +1V8_VDD 1 − 2 (Default) Connects to on-board +1V8_VDD power supply
2 − 3 External power supply connection
P11 LED_ON 1 − 2 (Default) Connects to on-board LED to indicate power on
P14, P15 EEPROM ADDR P14 Closed, P15
Open (Default)
EEPROM Address set to 0xA8
P14 Open,
P15 Open
EEPROM Address set to 0xAC
P14 Open,
P15 Closed
EEPROM Address set to 0xA4
P14 Closed,
P15 Closed
EEPROM Address set to 0xA0