www.onsemi.com
9
ON Semiconductor Confidential
ON Semiconductor
A properly configured Hybrid Demonstrator Board looks like the one shown in Figure 5. The correct settings are
indicated by red rectangles.
Figure 5. Properly Configured Ezairo 7111 Hybrid Demonstrator Board
Table 6. Jumper Configurations for Ezairo 7111 Hybrid Demonstrator Board
Jumper/Switch
Required Setting
Description
PSU-SEL
Short pins 1&2
Draws power from 6-pin DIN connector
VBAT-I
Short pins together
Not measuring current
RCVR-EN
Short pins 1&2
Enable 7111V2 output drivers
RCVR-BAT
Leave open
Using onboard power
ON-OFF
Set to ON
Power switch for E7160
