www.onsemi.com
14
ON Semiconductor Confidential
Ezairo® 7111 V2 Pre Suite Getting Started Guide
Figure 10. Detecting the Device
7. Use the back button—the arrow in the top left corner—to return to the Control Panel.
8. To connect to the device, click
Programmer
>
Connect
. You might get a popup warning you that the device is
configured with another library. If you see this pop-up, click
OK
.
9. Before communicating any parameter information, Sound Designer Software checks the device to determine
the firmware version currently residing in NVM. If the current version (contained within Sound Designer
Software) is not the same as that currently in the device, you are prompted to upgrade the firmware. The
prompt screen looks similar to that shown in Figure 11 on page 15.
