OMS ARIES TG 300C, Руководство по эксплуатации и обслуживанию

Страница: 19 / 32

19
is incorrect, reverse two wires of the three phases of power in the plug
(N.B. do not move the BLUE wire = neutral). It is advisable have this
operation carried out by trained personnel.
The three-phase motors on professional CE slicing machines can operate
with both 230V three-phase voltage and with 400 V voltage.
Unless otherwise specified, connections are made for 400 V power. In
order to adapt to 230 V three phase power, request the intervention of
the “SERVICE CENTRE”.
4.3 WIRING DIAGRAMS
4.3.1 WIRING DIAGRAM OF THE THREE PHASE SYSTEM
Figure 6 - 400 V three phase wiring diagram with 5P plug