Omron ZX2 Series, Руководство пользователя, Страница: 78 / 132

Setting the Hysteresis
78
ZX2 User’s Manual
INTRODUCTION
MAIN
APPLICATIONS
& SETTING
METHODS
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
DETAILED
SETTINGS
FLOW OF
OPERATION
CONTENTS
PREPARATION
FOR
MEASUREMENT
BASIC
SETUP
TROUBLE-
SHOOTING
Height
Double
Sheet
Detection
Positioning
Eccentricity
and Surface
Deflection
Steps
and
Warpage
Thickness
2
Hysteresis width setting
3
Return to RUN mode
• The hysteresis width for HIGH, PASS or LOW judgment is disabled when the hold function is
enabled.
• The hysteresis width is enabled when the self-trigger is set.
Button
Operation
Display Description of Operation
Explanation of
Selection Menu
Press the button to display
.
Press the button to enable
setting of the hysteresis width.
Set any value.
Press the button to move
the digit, press the button to
change the numeric value, and
set the hysteresis width.
* If the button is pressed
when the cursor is at the
right-most digit or the
button is pressed when the
cursor is at the left-most digit,
the setting will be canceled.
Press the button to apply
the setting.
Button
Operation
Display Description of Operation
Explanation of
Selection Menu
Hold down the button for
three seconds to switch to the
RUN mode.
Press to display
.
Default value: 0.000
Press to display.
Press to set.
[Change numeric value]
[Move digit]
Hold down for
3 seconds
Out
Important