Smart setting software for advanced functionality
The SmartMonitor Zero Professional software provides
a function that changes measurement levels (edge thresholds)
to reduce error caused by light penetration, enabling many
types of PCBs to be handled. The measurement level can be
increased to adjust the measurement position for peak light
reception. This function enables stable detection of PCB
surfaces. If there is insufficient light in high-speed mode,
gain settings (0 to 5) can be used to compensate.
To achieve stable sensing of PCBs, resins, black rubber, and
other light-penetrating objects, all you need to do is select the
surface type.
ZS-LD50/LD80
Stable measurements for PCBs, black resin and metal
Smart set up for
different surfaces
Direct measurement of PCB surface profile structure
Reflection signal quality is traced
during measurement. Reliable and
safe operation is ensured through
easy set up and control
Simply select your surface
type and the ZS smart
sensor concept sets all
specific parameters for
your application
Direct setting with
function keys
