![background image](http://html.mh-extra.com/html/omron/zj-sd-series/zj-sd-series_user-manual_1633371032.webp)
18
S
ect
io
n
2
P
R
E
P
ARA
T
IO
N
FO
R
ME
ASUR
EM
ENT
ZJ-SD
User’s Manual
Section 2
Mounting on the Mounting Bracket
■
Example of mounting the ZX-UD__
1.
Fix the ZX-UD__ onto the mounting bracket (ZJ-XBU1) using the M18 tightening nut.
The nut must be tightened with a torque of 45 Nm or less.
2.
Fix the ZJ-S___ using the screws.
Do not allow anything to touch the metal case of the Sensor Head. Failure to do so might prevent accurate
measurement by the sensor.
Tighten by holding the
M18 tightening nut
(supplied) between your
fingers to secure.
Wave
emitting/receiving
section
18.5 mm dia.
(+0.5/0)
Sensing
section
operation2.book Page 18 Wednesday, November 29, 2006 2:56 PM