![background image](http://html1.mh-extra.com/html/omron/zfv-series/zfv-series_user-manual_744103065.webp)
62
Section 3
SETUP
ZFV
User’s Manual
Section 3
Changing the Input/output Conditions
■
Selecting one-shot output ON/OFF
Set whether or not to enable one-shot output on the OUTPUT signal.
MENU Mode-[SYS2]-[OUTPUT]-[ONE SHOT]
■
Setting the one-shot output time
OUTPUT turns ON for the preset time from when the OUTPUT signal turns ON.
This setting is valid only when [ONE SHOT] is set to [ON].
MENU Mode-[SYS2]-[OUTPUT]-[OUTPUT TIME]
Setting the ON delay time
Set this item to delay the timing that the OUTPUT signal turns ON.
MENU Mode-[SYS2]-[OUTPUT]-[ON DELAY]
Setting
Description
OFF (default value)
One-shot output is not performed.
ON
One-shot output is performed.
Setting
Description
0 to 255 (default value:0)
Set the time (ms) that OUTPUT is turned ON.
Setting
Description
0 to 255 (default value:0)
Set the time (ms) to delay turning ON of the OUTPUT signal.
When one-shot output is set to [ON], the OFF delay time setting is disabled.
OFF
ON
OUTPUT
Delay time
OUTPUT ON at OK judgment in continuous measurement
Judged as NG
Judged as OK
Judged as NG
Содержание ZFV Series
