Omron V780-HMD68-EIP-JP, Руководство пользователя

Страница: 163 / 326

7 - 11
7 Ethernet/IP Communications
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
7-1
Ou
tlin
e
7
7-1
-6 V780 C
ommands
The following table lists the command codes that you can specify for execution by the Reader/Writer.
Set these codes in the Command Code field in the command area.
7-1-6 V780 Commands
Command code
Classification Command Code Command name Reference
RF Tag communications
(Single-access) 0001 hex READ ID P. 7-13
0002 hex ID WRITE P. 7-14
0003 hex READ DATA P. 7-15
0004 hex WRITE DATA P. 7-17
0005 hex LOCK P. 7-19
0006 hex DATA FILL P. 7-21
RF Tag communications
(Multiaccess) 0203 hex MULTIACCESS ID READ P. 7-23
0204 hex MULTIACCESS DATA READ P. 7-25
Reader/Writer control 1001 hex INITIALIZE P. 7-27
1002 hex RESET P. 7-28
1004 hex RESET FOCUS P. 7-29
Reader/Writer information acqui-
sition 2001 hex SET TCP/IP COMMUNICATIONS CONDITIONS P. 7-30
2002 hex GET TCP/IP COMMUNICATIONS CONDITIONS P. 7-31
200B hex SET MODEL NAME
Reader/Writer setting commands
(Network settings) 5003 hex SET MULTI-READER/WRITER CONFIGURA-
TION P. 7-33
5004 hex GET MUTLI-READER/WRITER CONFIGURA-
TION
4007 hex GET MUTLI-READER/WRITER STATUS P. 7-36
Reader/Writer setting commands
(Communications settings) 3001 hex SET TAG COMMUNICATIONS CONDITIONS P. 7-37
3002 hex GET TAG COMMUNICATIONS CONDITIONS P. 7-39
3003 hex SET TRANSMISSION POWER P. 7-40
3004 hex GET TRANSMISSION POWER P. 7-42
3005 hex SET CHANNEL P. 7-44
3006 hex GET CHANNEL P. 7-45
3007 hex SET GEN2 SESSION P. 7-46
3008 hex GET GEN2 SESSION P. 7-47
3009 hex SET ACCESS PASSWORD P. 7-48
300A hex GET ACCESS PASSWORD P. 7-49
300B hex SET RF TAG SELECTION FILTER CONDITIONS P. 7-50
300C hex GET RF TAG SELECTION FILTER CONDITIONS P. 7-51
300D hex SET RSSI FILTER CONDITIONS P. 7-52
300E hex GET RSSI FILTER CONDITIONS P. 7-53
300F hex SET TRANSMISSION TIME P. 7-54
3010 hex GET TRANSMISSION TIME P. 7-56
3011 hex SET SMOOTHING BUFFER P. 7-57
3012 hex GET SMOOTHING BUFFER P. 7-58
Maintenance commands
(Device information) 4001 hex GET MODEL INFORMATION P. 7-59
4002 hex GET FIRMWARE VERSION P. 7-60
4005 hex GET TIME INFORMATION P. 7-62
4006 hex SET TIME INFORMATION P. 7-61
Maintenance commands
(History information) 4101 hex GET SYSTEM ERROR LOG P. 7-63
4102 hex CLEAR SYSTEM ERROR LOG P. 7-65
4103 hex GET COMMAND ERROR LOG P. 7-66
Maintenance commands
(Communications information) 4201 hex GET RF TAG ADDITIONAL INFORMATION P. 7-68
4202 hex GET NOISE LEVEL P. 7-69
4203 hex GET COMMUNICATIONS DIAGNOSTIC INFOR-
MATION P. 7-70