Omron V780-HMD68-EIP-JP, Руководство пользователя

Страница: 213 / 326

7 - 61
7 Ethernet/IP Communications
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
7-
2 V780 Co
mm
and
Detail
s
7
7-2
-7 Maintenance Comma
nds:
Device Informa
tion
z Function
This command sets the time information in the Reader/Writer.
When the Reader/Writer is restarted, the time information is reset. (All zeros will be set for the actual
time flag, hour, minutes, and seconds.)
z Command Area
z Response Area
SET TIME INFORMATION
Signal/data Data type Size Function
CmdCode/Command Code WORD 2 bytes 4005 hex
CmdParam1/Command Parameter 1 WORD 2 bytes 0000 hex (Not used.)
CmdParam2/Command Parameter 2 WORD 2 bytes 0000 hex (Not used.)
Reserved/Reserved Area WORD 2 bytes 0000 hex (Not used.)
Cnt Response/Update Counter
Response WORD 2 bytes 0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.
CmdData/Command Data
Time informa-
tion Resv BYTE 1 byte Always 00 hex.
Hour BYTE 1 byte Hour
0 to 23
Minutes BYTE 1 byte Minutes
0 to 59
Seconds BYTE 1 byte Seconds
0 to 59
Signal/data Data type Size Function
ErrCode/Command Code WORD 2 bytes Error code
RespInfo1/Response Information 1 WORD 2 bytes 0000 hex (Not used.)
RespInfo2/Response Information 2 WORD 2 bytes 0000 hex (Not used.)
RespInfo3/Response Information 3 WORD 2 bytes 0000 hex (Not used.)
Cnt/Update Counter WORD 2 bytes 0000 to FFFF hex
The value is counted up due to a change in
the response area.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.