Omron V780-HMD68-EIP-JP, Руководство пользователя

Страница: 199 / 326

7 - 47
7 Ethernet/IP Communications
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
7-
2 V780 Co
mm
and
Detail
s
7
7-2
-6 Rea
der/W
riter Setting Comman
ds: C
ommunications Setting
s
z Function
This command is used to check the Gen2 session that is set in the Reader/Writer.
z Command Area
z Response Area
GET GEN2 SESSION
Signal/data Data type Size Function
CmdCode/Command Code WORD 2 bytes 3008 hex
CmdParam1/Command Parameter 1 WORD 2 bytes 0000 hex (Not used.)
CmdParam2/Command Parameter 2 WORD 2 bytes 0000 hex (Not used.)
Reserved/Reserved Area WORD 2 bytes 0000 hex (Not used.)
Cnt Response/Update Counter
Response WORD 2 bytes 0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.
Signal/data Data type Size Function
ErrCode/Error Code WORD 2 bytes Error code
RespInfo1/Response Information 1 WORD 2 bytes 0000 hex (Not used.)
RespInfo2/Response Information 2 WORD 2 bytes 0000 hex (Not used.)
RespInfo3/Response Information 3 WORD 2 bytes 0000 hex (Not used.)
Cnt/Update Counter WORD 2 bytes 0000 to FFFF hex
The value is counted up due to a change in
the response area.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.
RespData/Response Data
Gen2 session WORD 2 bytes Expresses the session to use for RF Tag com-
munications.
0000 hex: S0 flag
0001 hex: S1 flag
0002 hex: S2 flag
0003 hex: S3 flag
Default setting: 0000 hex