Omron V780-HMD68-EIP-JP, Руководство пользователя

Страница: 173 / 326

7 - 21
7 Ethernet/IP Communications
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
7-
2 V780 Co
mm
and
Detail
s
7
7-2
-1 Single
-access Communicat
ions Comman
ds
z Function
This command writes the specified data to the specified number of words beginning from the speci-
fied write start address. The specifications are made in the command.
z Command Area
DATA FILL
Signal/data Data type Size Function
CmdCode/Command Code WORD 2 bytes 0006 hex
CmdParam1/Command Parameter 1 WORD 2 bytes First word address of the data to write to the
RF Tag (in words)
0000 to 07FF hex: Reserved area
1000 to 17FF hex: EPC area
2000 to 27FF hex: TID area
3000 to 3FFF hex: User area
CmdParam2/Command Parameter 2 WORD 2 bytes Specify in 4-digit hexadecimal the number of
words of data to fill.
Setting range: 0000 hex or 0001 to 0800 hex
• If 0000 hex is specified for the number of fill
words, the entire memory area will be filled.
• You cannot write data to more than one
area with the same command.
Reserved/Reserved Area WORD 2 bytes 0000 hex (Not used.)
Cnt Response/Update Counter
Response WORD 2 bytes 0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.
CmdData/Command Data
Fill data WORD 2 bytes Fill data to write to the RF Tag (always one
word)