Omron V680-D1KP66T-SP, Руководство пользователя

Страница: 9 / 33

Precautions for Correct Use
Always observe the following precautions to prevent operation failures, malfunctions, and adverse effects on
performance and equipment.
1. Installation Location
Do not install the product in the following locations:
・
Locations subject to corrosive gases, dust, dirt, metal powder, or salt
・
Locations where the specified ambient operating temperature range is exceeded
・
Locations subject to extreme temperature changes that may result in condensation
・
Locations where the specified ambient operating humidity range is exceeded
・
Locations where the product would be directly subjected to vibration or shock exceeding specifications
・
Locations subject to contact with water, oil, or chemicals
2. Installation
・
The product uses the 13.56MHz frequency band to communicate with Tags. Some devices, such as some
tranceivers, motors, inverters, and switch mode power supplies, generate electromagnetic waves (i.e., noise) that
can affect communications with the Tags. If any of these devices are nearby, communications with Tags may be
affected or Tags may be destroyed, If the product is to be used near such devices, check the effects on
communications before using the product.
・
To minimize the general influence of noise, follow the following precautions:
(1)Ground the earth terminal of this product and any metallic material located around the product to 100 Ω or less.
(2)Keep product wiring away from high voltage or heavy current.
・
Attach the accompanying ferrite core (Type:ZCAT2032-0930 made by TDK Corp.) around the cables that are
connected with the power and grounding terminals.
・
The product does not provide a water-proof structure. Do not use it where mists are present.
・
Communications performance may be reduced due to mutual interference if more than one Read/Write Antenna
is installed in the same vicinity.
Refer to this Manual and confirm that there is no mutual interference between Read/Write Antennas.
3. Storage
Do not store the product in the following locations:
・
Locations subject to corrosive gases, dust, dirt, metal powder, or salt