Omron V680-CA1D, Руководство пользователя

Страница: 68 / 113

66
S
ect
io
n
4
Communic
a
tions
Comma
nds
Heat-resistive RFID System
User's Manual
Section 4
Reading from/Writing to Tags
POLLING AUTO READ (PR)
When the host device sends a POLLING AUTO READ command to the Controller, the Controller
immediately returns a response to the host device indicating reception of the command. Then the
Controller waits for the approaching Tag and reads the data of the Tag when the ID Tag is in the
communications area.
When the Tag is in the communications area, the host device can use a subcommand to request the
command processing results.
Name Details
Data type Specifies the code format when sending the read data response.
A: ASCII
H: Hexadecimal code
Antenna designation Always 1
Start address Specifies the start address of the area in the Tag from which data is to be read from in 4-digit
hexadecimal code.
Setting range: 0000h to 03E7h
Number of read bytes Specifies the number of bytes to be read from the Tag in 2-digit hexadecimal code.
The number of bytes that can be read at one time is as follows:
Setting range
ASCII: 256 bytes (256 characters), set value: 01h to FFh
Hexadecimal code: 128 bytes (256 characters), set value: 01h to 80h
Name Details
End code Indicates the execution result for the command.
Name Details
Data type Specifies either to request the result of or to abort polling auto processing.
Specifies the code format when sending the read data response.
C: Request for processing results
H: Abort
Antenna designation Always 1
Command
× ×
P R
× ×
A/H 1
× ×
2 1 1 4 2
× ×
2
@
× ×
3
*
CR
2
Data
type
Antenna
designation Start address
Number of
read bytes
FCS Controller No. Terminator
Command
code
Response
P R
× ×
7 4
2 2 2
@
× ×
3
*
CR
2
End code FCS Terminator Command code Controller No.
Subcommand
P R
× ×
C/E 1
2 1 2
@
× ×
3
*
CR
2 1
Data
type
Antenna
designation FCS Controller No. Terminator
Command
code