![background image](http://html1.mh-extra.com/html/omron/v640-ham11-etn/v640-ham11-etn_user-manual_741374054.webp)
52
SECTION 4
Command/Response Format
CIDRW System
User’s Manual
SECTION 4
Reading from/Writing to ID Tags
■
RESET
All Amplifier Unit processing is stopped, and the initial status is re-established.
There is no response to this command.
■
SET WEB PASSWORD
This command sets the Web password.
If you set a password, a Password entry window will be displayed when you start the browser window.
When the Password Is Not Set
* Only the following characters can be used in passwords: 0 to 9, a to z, and A to Z. If any other characters are used, error 14 will
occur.
* If the password is not between 1 and 16 characters long, error 14 will occur.
When the Password Is Not Set
Never turn OFF the power supply to the Amplifier Unit before a response is received from the Amplifier Unit for this
command. Doing so may damage the Amplifier Unit.
The values are enabled when the Amplifier Unit is restarted.
Command code
CR
7
F
0Dh
Command code
Password (1 to 16 characters)
CR
A
2
0Dh
Command code
CR
A
2
0Dh
Response
code
CR
0
0
0Dh
Command
Response
Command
Response
Содержание V640-HAM11-ETN
