![background image](http://html1.mh-extra.com/html/omron/v640-ham11-etn/v640-ham11-etn_user-manual_741374055.webp)
53
CIDRW System
User’s Manual
SECTION 4
Command/Response Format
SECTION 4
Reading from/Writing to ID Tags
■
SET NETWORK
This command sets the IP address and subnet mask in ROM.
* If an error occurs when writing to EEPROM, error 9A will be returned.
Never turn OFF the power supply to the Amplifier Unit before a response is received from the Amplifier Unit for this
command. Doing so may damage the Amplifier Unit.
The values are enabled when the Amplifier Unit is restarted.
Command code
First octet
Second octet
Third octet
Fourth octet
CR
A
3
0Dh
Parameter Description
Parameter
Description
Type
IP address setting: 00
Subnet mask setting: 01
First to fourth octets
The address is set in decimal in four octets of three characters each.
Response
code
CR
0
0
0Dh
Command
Response
Содержание V640-HAM11-ETN
