TM Conveyor Tracking
Software version: TMflow 1.76
26
4
Select
Tool
To ensure consistent precision, it is
strongly recommended to use TM
Calibration Set while teaching the 2 CV
points.
Figure 20 Select tool
5
Click CVSensor’s .
Set IO Number based on the sensor’s
IO position and the sensor trigger
signal.
•
I/O Number setting
•
Enable Time setting
•
If the trigger signal is high, select
Rising Edge Detect.
•
For details about I/O Number and
Enable Time settings, refer to
4.2
.
•
Then click NEXT to start calibration
for the sensor.
•
Upon entering calibration, follow
the instructions shown in the image
(
Figure 24
).
Figure 21 CVSensor
Figure 22 Sensor calibration
