![background image](http://html1.mh-extra.com/html/omron/stc-mbe132u3v/stc-mbe132u3v_product-specifications-and-users-manual_742901031.webp)
No.13S062-07
31/53
STC-MBE132U3V / MCE132U3V / STC-MCE132U3V-C
Product Specifications and User’s Guide
9 Camera Functions
This chapter describes the camera functions.
9.1
ROI (Region of Interest)
This sets the ROI in order to output the selected area of image.
The frame rate increases when reducing the height of image. The frame rate does not change when reducing the
width of image.
9.1.1 ROI (One Region)
GenICam Parameters
Width
Integer Type
Horizontal (Pixel) size
Sets the width of image.
“Width + OffsetX” should not exceed the maximum width.
Height
Integer Type
Vertical (Line) size
Sets the height of image.
“ OffsetY” should not exceed the maximum height.
OffsetX
Integer Type
Horizontal (Pixel) offset
Default: 0
Setting steps: 2 pixels
OffsetY
Integer Type
Vertical (Line) offset
Default: 0
Setting steps: 2 lines
The parameters define as following chart.
(*) Width, Height, OffsetX, OffestY setting steps is the same in Binning and Decimation.
Width
Height
OffsetX
OffsetY
ROI Region