Omron SC20G2, Руководство по эксплуатации

Страница: 68 / 95

2. Power management UPS
2.1 clauses explain the power supply state of a SNMP/Web card and 2.2 clauses or later explain
power supply management of an uninterruptible power supply (UPS).
2.1. Power supply state of a SNMP/Web card
According to the state of AC input to an uninterruptible power supply (UPS) and an uninterruptible power
supply (UPS), etc., the power of a SNMP/Web card becomes as follows.

Power state of the normal time
AC input to the UPS
UPS power
Off (No AC input)
On (Yes AC input
)
Off
SNMP/Web card Off SNMP/Web card On
On SNMP/Web card On SNMP/Web card On

The power states at the time of a shutdown, etc.
・
At the time of schedule operation, etc.
No.
state
AC input to the
UPS
UPS power
The power supply of a
SNMP/Web card
1
Immediate stop of UPS from
the Web page
On
Off SNMP/Web card On
2
UPS stop by schedule
operation
On
Off SNMP/Web card On
3
AC input OFF after a power
stop by schedule operation
Off Off
SNMP/Web card Off
(*1)
4 AC input restoration after
the state of No.3
On
Off SNMP/Web card Off
5
UPS starting by schedule
operation after the state of 4
On On
SNMP/Web card On
*1:
An uninterruptible power supply (UPS) is stopped by schedule operation, and also when AC
input is set to Off, power supply to a SNMP/Web card is stops, but a schedule setup is
effective and the uninterruptible power supply (UPS) start to operate according to schedule.
・
At the time of the uninterruptible power supply (UPS) stop by a power failure etc.
No.
state
AC input to the
UPS
UPS power
The power supply of a
SNMP/Web card
1 After a UPS stop at a power
failure
Off Off SNMP/Web card Off
2
AC input is restored after a
UPS stop by a power failure.
I n c a s e o f “
AC Restore/
AC Reboot
: Disable”
On
Off SNMP/Web card Off
3
AC input is restored after a
UPS stop by a power failure.
I n c a s e o f “
AC Restore/
AC Reboot
: Enable”
On On SNMP/Web card On
Note: The communication with a card cannot do at the time of "the SNMP/Web card Off."
66