Omron PROFINET NX-PNC202, Руководство пользователя

Страница: 174 / 282

9 Setting Up the PROFINET Coupler Unit
9 - 18
NX-series PROFINET Coupler Unit User’s Manual (W623)
To compare the IO Device Terminal settings, connect the Sysmac Studio to the USB port of the PROF-
INET Coupler Unit to compare. Use the following procedure.
Refer to
9-2-5 Sysmac Studio Functions Used as Required
on page 9-12 to compare the Unit configu-
ration.
1
Connect the Sysmac Studio to the USB port on the PROFINET Coupler Unit.
2
In the Unit Settings Pane on the Edit IO Device Terminal Configuration Tab Page, click the
Online button next to Coupler Connection (USB) for the target PROFINET Coupler Unit.
An execution confirmation dialog box is displayed.
3
Click the OK button.
The Sysmac Studio will go online.
4
Right-click the target PROFINET Coupler Unit and select Coupler Connection (USB) − Com-
pare from the pop-up menu.
The results of the comparison are displayed as shown below.
When the Settings Are the Same:
When the Settings Are Different:
9-3-2 Comparing Settings