Omron PROFINET NX-PNC202, Руководство пользователя

Страница: 160 / 282

9 Setting Up the PROFINET Coupler Unit
9 - 4
NX-series PROFINET Coupler Unit User’s Manual (W623)
Parameters must be set to ensure that the IO Device Terminal operates as intended and performs data
exchange with other PROFINET devices. The settings are listed in the following table.
Refer to
9-2 Setting IO Device Terminal Parameters
on page 9-5 for details on the settings.
Use the following procedures to set up an IO Device Terminal for connection to a third party PROFINET
IO Controller.
9-1-2 IO Device Terminal Parameters
Setting Description
IO Device Termi-
nal configuration
and operation set-
tings
Configuration
information
NX Unit configuration infor-
mation
This information describes the configura-
tion of the IO Device Terminal.
IO allocation information This information specifies what IO data in
the NX Units of the IO Device Terminal to
exchange with process data communica-
tions.
NX Unit operation settings These are the operation settings for each
NX Unit in the IO Device Terminal.
NX Unit application data settings These data settings enable the functional-
ity that is specific to each NX Unit.
9-1-3 Setting Procedures
1
Setting PROFINET Cou-
pler Unit parameters with
Sysmac Studio
Refer to
9-2 Setting IO
Device Terminal Parame-
ters
on page 9-5.
(1)
Setting the NX Unit Configuration Information
on page 9-5
(2) NX Unit IO Allocation on page 9-27
(3)
Unit Operation Settings
on page 9-10
(4)
Unit Application Data
on page 9-11
(5)
Sysmac Studio Functions Used as Required
on page
9-12
2
9-3 Transferring and Comparing Settings
on page 9-16
3
9-4 Setting PROFINET IO Device Name
on page 9-19
4
9-5 Setting PROFINET IO Data
on page 9-20
5
9-6 NX Unit IO Allocation on page 9-27