Omron NYP - 1 Series, Руководство пользователя по оборудованию

Страница: 174 / 266

Refer to 3-10-10 UPS on page 3-32 for more information.
2
For Panel PCs that do not have Windows pre-installed: Download the above mentioned soft-
ware.
3
Wire the S8BA UPS.
1) Wire the input of the UPS to the output of the Power Supply.
2) Wire the output of the UPS to the power connector of the Panel PC.
3) Ground the UPS.
4) Connect the Contact port of the S8BA UPS to the I/O port of the Panel PC with the connec-
tion cable S8BW-C02.
IPC Product
Input
24 VDC Power Supply (S8VK)
AC (L)
AC (N)
24 VDC
0 VDC
UPS (S8BA)
BU
BS
COM
Contact I/O
6
5
2
1
24 VDC
0 VDC
Output
4
6
1
UPS Mode Input
UPS Mode Input
Power Status Output
Power Status Output
4
Power ON the Panel PC.
5
Configure the UPS.
1) Connect the USB cable supplied with the UPS to the USB connector of the UPS and to the
USB connector of the Panel PC.
2) Configure the UPS using the UPS Settings Utility.
Refer to UPS Setting Utility Instruction Manual for S8BA/BU-2RWL for details.
3) Remove the USB cable between the UPS and the Panel PC
6
Configure the Panel PC to auto-start after power loss within the BIOS settings.
Refer to
A-1 BIOS on page A-2 for BIOS details.
7
Create a software program that monitors the UPS Mode Input and initiates Power OFF of the
Panel PC when the UPS Mode Input becomes active.
If the Panel PC has a Windows operating system then use the Industrial PC System API to cre-
ate the software program.
Refer to
NY-series Operating Systems and Software Utilities Manual (Cat. No. W616) for API
details.
8
Install the created software program.
5 Installation
5-54
NY-series Industrial Panel PC Hardware User's Manual (W555)