Omron NYM12W-C100, Руководство пользователя

Страница: 107 / 130

5-4-2
Connection Procedure
Use the following procedure to connect the Industrial Monitor.
Ensure the Monitor is securely fastened to the mounting surface.
Ensure the mounted Industrial Monitor can be connected to power and peripheral devices. Remove
dust covers where applicable and store them in a safe place.
Additional Information
• Refer to 5-2 Mount on page 5 - 4 for mounting details.
• Refer to
• 2-4-1 DVI Cables on page 2 - 10
• 2-4-2 USB Type-A to USB Type-B Cables on page 2 - 11
• 2-4-3 NY Monitor Link Cables on page 2 - 12
for bending radius details.
• Refer to individual cable specifications for acceptable bending radius and connector clear-
ance.
Use the following procedure to connect the Industrial Monitor:
1
Ensure the ground terminal F is connected.
Refer to 5-3-1 Ground on page 5 - 17 for ground connection details.
2
Connect the power connector
A
and tighten the screws with a torque of 0.3 N·m max. using a
screwdriver.
3
Connect the DVI-D connector B to a host PC and tighten the fastening screws or connect the
NY Monitor Link connector G to a host PC.
4
For an Industrial Monitor with a DVI-D connector also connect the USB Type-B port C D to a
host PC to enable touchscreen functionality.
5
Connect the optional slave devices to the USB Type-A ports C as needed.
Precautions for Safe Use
Power ON after the DVI cable or NY Monitor Link cable is connected between the host PC and
the product.
The Industrial Monitor is connected.
5 Installation
5 - 27
NY-series Industrial Monitor User's Manual (W554)
5-4 Connect
5
5-4-2 Connection Procedure