Omron NY Series, Руководство пользователя

Страница: 88 / 100

Functions in NS-Runtime
There are differences in the functions beween NS Projects and NS-Runtime.
In this section an overview of the function differences.

Functional and Fixed Objects
Overview of the functional differences of functional objects and fixed objects.
Parts / Functions Details
Video part The parts themselves are not supported by NS-Run-
time.
When converting to NS-Runtime, the video display
parts will be deleted. Even if you copy from an NS
series project to an NS-Runtime project, the video
display parts will not be pasted.
Command Button – Video Control – Video Capture If you convert or copy a part for which this function is
registered, the function will change without process-
ing.
Command Button – Video Control – Contrast Adjust-
ment
Command Button – Video Control – Vision Sensor
Console Output
Multifunction – Capture Data Display
If you convert or copy a part for which this function is
registered, the corresponding function will be delet-
ed.
Multifunction – Ladder Monitor
Multifunction – Pro-Con
Multifunction – Pro-Con(CS)
Multifunction – Data Trace
Fixed Objects - Polygon
The positions of the vertices may shift a little.

Macros
Overview of the functional differences for macros in NS-Runtime.
Macro function Details
SETTIME As with writing the time from the date / time compo-
nent, writing the time with this function requires ad-
ministrator’s right.
WRITECF
READCF Data is read / written from / to specified folder which
is set in System Settings – History tab.
5 Conversion Procedures
5-16
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)