3
Introduction
Thank you for purchasing an NX-series NX1P2 CPU Unit and the Sysmac Studio.
This
NX1P Programming Practices Guide for Beginners
(hereafter referred to as “this Guide”)
describes the differences in programming between the NX1P and traditional controllers and the
programming procedures using the Sysmac Studio that are required to use an NX1P2 CPU
Unit for the first time. You can perform the procedures that are presented in this Guide to
quickly gain a basic understanding of the NX1P2 CPU Units and the Sysmac Studio. This
Guide does not contain safety information and other details that are required for actual use.
Thoroughly read and understand the manuals for all of the devices that are used in this Guide
to ensure that the system is used safely. Review the entire contents of these materials,
including all safety precautions, precautions for safe use, and precautions for correct use.
For the startup and operating instructions for motion control, refer to the
NJ/NX-series Startup
Guide for Motion Control
(Cat. No. W514).
Intended Audience
This Guide is intended for the following personnel, who must also have knowledge of electrical
systems (an electrical engineer or the equivalent).
• Personnel in charge of introducing FA systems
• Personnel in charge of designing FA systems
• Personnel in charge of installing and maintaining FA systems
Applicable Products
This Guide covers the following products.
• NX1P2 CPU Units of NX-series Machine Automation Controllers
• Automation Software Sysmac Studio
Special Information
The icons that are used in this Guide are described below.
Precautions for Correct Use
Precautions on what to do and what not to do to ensure proper operation and
performance.
Additional Information
Additional information to read as required.
This information is provided to increase understanding or make operation easier.
