Omron NV3Q Series, Руководство по подключению

Страница: 96 / 145

72
EH-150/EHV Series
Section 9-1
Applicable PLCs: EHV-CPU128, EHV-CPU64, EHV-CPU32, and EHV-
CPU16
Settings must be made with the Programming Tool. Set the serial communica-
tions port as shown below using the Programming Tool.
*1 The interface depends on the communications method.
*2 Refer to the Control Editor EH-150EH Series Ladder Programming Soft-
ware Manual for the communications setting procedure.
Applicable PLC: EH-SIO (port 1 or 2)
DIP switch settings and ladder program to make initial settings are required.
Set the port DIP switch as follows:
Set the EH-SIO communications port from the ladder program as follows:
Note Refer to the EH-SIO Application Manual for the communications
setting procedure.
9-1-1 RS-232C Connections
Connecting to the EH-
RS05 with a user-made
cable.
Item Setting
Type Special port
Port type
*1 RS-232C connection: RS-232C
RS-422A connection: RS-422A/485
RS-485 connection: RS-422A/485
Baud rate 19,200 bps
Communications
procedure Transmission control procedure 1 (no station numbers), 1:1
communications
Station number None
Modem connection None
Item Setting
Baud rate 19,200 bps
Data length 7
Parity Even
Stop bits 1
Item Setting
Initial communica-
tions mode Hi-Protocol mode
Communications
procedure Transmission control procedure 1 (no station numbers)
Station number None
PT
EH-RS05
Hitachi PLC
User-made
cable