Omron NV3Q Series, Руководство по подключению

Страница: 26 / 145

2
MELSEC-FX1N Series
Section 1-1
1-1 MELSEC-FX1N Series
PLC Model Selection Select Mitsubishi MELSEC-FX Series.
Applicable Devices
Note (1) The addressable memory ranges depend on the model of PLC that is
used. Refer to the user manuals for your PLC for details.
(2) Word device addresses in the input relay, output relay, and auxiliary relay
areas must be multiples of 16 when expressed in decimal form. (For ex-
ample: X 000, X020, X040... or M 000, M 016, M 032)
Communications Settings The following communications settings are recommended for the PT and
PLC.
■
PT Communications Settings (Set from the NV-Designer using the NV
Configuration.)
■ PLC Communications Settings
Set D8120 to 0. (The default value is 0, so normally nothing needs to be
done.)
Bit/word devices No. Comments
Bit devices Input relays X 0000 to X 0337
Output relays Y 0000 to Y 0337
Auxiliary relays M 0000 to M 1535
State relays S 0000 to S 0999
Timer contacts TS 0000 to TS 0255
Counter contacts CS 0000 to CS 0255
Word devices Input relays X 0000 to X 0320 The decimal equivalent of the address must be a
multiple of 20.
Output relays Y 0000 to Y 0320 The decimal equivalent of the address must be a
multiple of 20.
Auxiliary relays M 0000 to M 1520 The address must be a multiple of 16.
State relays S 0000 to S 0976 The address must be a multiple of 16.
Timer current values TN 0000 to TN 0255
16-bit counter current values CN 0000 to CN 0199
32-bit counter current values CN 0200 to CN 0255
Data registers D 0000 to D 0999
Item Setting
Baud rate 9,600 bps
Data bits 7
Stop bits 1
Parity Even