Omron NV3Q Series, Руководство по подключению

Страница: 66 / 145

42
S7-200 Series
Section 5-1
5-1 S7-200 Series
PLC Model Selection Select Siemens S7-200 Series.
Applicable Devices
*1 Use the following notation from the NV-Designer for PLC devices. Use the
NV-Designer notation when entering devices.
Communications Settings The following communications settings are recommended for the PT and
PLC.
■
PT Communications Settings
■ PLC Communications Settings
Bit/word devices No. Comments
Bit devices Inputs I 00 to I 77
Outputs Q 00 to Q 77
Bit memory M 00 to M 317
Timer contacts T 00 to T 255
Counter contacts C 00 to C 255
Special memory SM 00 to SM 1947
Sequence control relays S 00 to S 317
Word devices Inputs IW 0 to IW 6 Only even addresses can be set.
Outputs QW 0 to QW 6 Only even addresses can be set.
Bit memory MW 0 to MW 30 Only even addresses can be set.
Timer current values T 0 to T 255 Only even addresses can be set.
Counter current values C 0 to C 255 Only even addresses can be set.
Special memory SMW 0 to SMW 193 Only even addresses can be set.
Sequence control relays SW 0 to SW 30 Only even addresses can be set.
Variable memory VW 0 to VW 5118 Only even addresses can be set.
PLC notation NV-Designer notation
Bit devices Q3.2 Q3-2
Word devices VW100 VW100
Item Setting
PT station number 01
PLC station number 02
Baud rate 9,600 bps
Data bits 8
Stop bits 1
Parity Even
Item Setting
PLC station number 02