59
2) When Touch Switches are Used:
When touch switches are used, the cursor moves from area to area accord-
ing to the layout of the screen. Thus, in the screen example shown above,
the Down Key would move the cursor from numeric setting 2 to numeric set-
ting 5. After that, the Down Key cannot move the cursor any further.
Pressing the Up Key would then move the cursor back to numeric setting 2,
and then continue to move it upward in order to numeric settings 1 and 3.
The Right Key would then have to be used to move the cursor to numeric
setting 4.
5-3
Standalone Function
When a screen for which the standalone function has been set by the Support
Tool is displayed, the screen can be changed by means of touch switches and
function keys.
Example
Registered Screen
Production Target
Screen 5
Touch switch
no. 1 display
area
Model no. NT600M-DT122
Number
produced
Items Registered to Screen by Support Tool
•
Standalone function setting
•
Touch switch or function key number
•
Screen number to be displayed when touch
switches or function keys are input
Example
Standalone function is set.
Touch switch number:
No. 1
Screen to be displayed: No. 5
Screen No. 5
Production Conditions
Production target: 5,000
Number produced: 2,500
Number defective: 2
When touch switch no. 1 is input,
screen no. 5 is displayed.
2,500
Standalone Function
Section 5-3
Содержание NT600M Series
Страница 1: ...NT600M Programmable Terminal Operation Manual Revised October 1997 ...
Страница 2: ...iv ...
Страница 4: ...vi ...
