![background image](http://html.mh-extra.com/html/omron/nt21/nt21_setup-manual_744541064.webp)
4-1
Section
Connecting to the RS-232C Port at the Host
53
Port connecting to PT
PC Setup
RS-232C port (D-Sub 9-pin) of CPM2C-CN111
Built-in RS-232C port settings
Peripheral port of CPM2C-CN111
Peripheral port settings
RS-232C port (D-Sub 9-pin) of CS1W-CN118
Built-in RS-232C port settings
Peripheral port of CS1W-CN114
Peripheral port settings
Peripheral port
RS-232C port
(D-Sub 9-pin, female)
CPM2C-CN111
CPM2C
RS-232C port
(D-Sub 9-pin, female)
CS1W-CN118
CPM2C
Peripheral port
CS1W-CN114
CPM2C
Setting the DIP Switches on the Front of a C200HX/HG/HE(-Z)E, CQM1,
CQM1H
When using a C200HX/HG/HE(-Z)E, CQM1, or CQM1H, the DIP switches on
the front panel must be set as shown below in order to make the settings in the
PC Setup (data memory) effective.
C200HX/HG/HE(-Z)E
CQM1
CQM1H
RS-232C port communication condition setting
Set pin 5 to OFF to make the settings made in
PC Setup effective.
Setting the Switches of a CPM2A
When using a CPM2A, the switches on the front panel must be set as shown
below in order to make the PC Setup settings effective.
Set the Communications
switch to OFF (down
position).
Содержание NT21
