Omron NT21, Руководство по установке

Страница: 182 / 222

6-13 Section Version Display
171
Standard Programming Console Key Sheet
Programming Console Key Sheet for CS/CJ Series
Differences with Respect to Programming Consoles
•
Programs cannot be stored (recorded) or read (replayed). If it is necessary to
store or read a program, use a Programming Device.
•
It is not possible to adjust the volume of the key press sound. Whether or not
the key press sound sounds is determined by the setting for the Key Press
Sound memory switch of the NT21. It sounds when the setting is ON and does
not when the setting is OFF (page 136).
•
If an error occurs when using the Programming Console function, an error
screen is displayed. Whether or not the buzzer sounds at this time is deter-
mined by the setting for the Buzzer Sound memory switch of the NT21 (page
137).
Reference: A communications error will occur if you use the Programming Console function
to change the communications settings (in the PC’s PC Setup) that govern the
port to which the NT21 is connected. In this case, the Programming Console
function will be unusable.
6-13 Version Display
Use the Version Display function to check the version of the NT21’s system pro-
gram. The Version Display screen shows the model, creation date, and version
of the system program installed in the NT21.