Omron NT21 Series, Справочное руководство

Страница: 77 / 466

2-3 Section Memory Tables
68
ues that are set with the Support Tool and written to the host when the Resume
function is not being used.)
Support Tool values Stored value
b f
Storage
T
Number
f
Contents of
h d
Stored value
f f
Stored Value
i d i l
Input Value
(before
confirmation)
Input Value
(after
confirmation)
before op-
eration
g
Type of
Words
host words after start of
operation
in decimal
--- 1 2 --- --- 3 4
123,456 123,456 0001 E240 BCD
1 3456 0000 0D80 3,456 , ,
2 0012 3456 0001 E240 123,456
$1E240 Binary 1 E240 FFFF E240 –7,616 $ y
2 0001 E240 0001 E240 123,456
–123,456 –123,456 FFFE 1DC0 BCD
1 F456 FFFF FE38 –1,456
, ,
2 F012 3456 FFFE 1DC0 –123,456
$FFFE 1DC0 Binary 1 1DC0 0000 1DC0 7,616 $ y
2 FFFE 1DC0 FFFE 1DC0 –123,456
61,441 61,441 0000 F001 BCD 1 1441 0000 05A1 1,441 , ,
2 61441 0000 F001 61,441
$F001 Binary
1 F001 FFFF F001 –4,095
$ y
2 0000 F001 0000 F001 61,441
65535 65,535 0000 FFFF BCD 1 5535 0000 159F 5,535 ,
2 0006 5535 0000 FFFF 65,535
$FFFF Binary 1 FFFF FFFF FFFF –1 $ y
2 0000 FFFF 0000 FFFF 65,535
–1 –1 FFFF FFFF BCD
1 F001 FFFF FFFF –1
2 F000 0001 FFFF FFFF –1
$FFFF FFFF Binary 1 FFFF FFFF FFFF –1 $ y
2 FFFF FFFF FFFF FFFF –1
Numeral Table Memory Data before Start of Operation
1, 2, 3... 1. Initial value inputs at the Support Tool are written into the numeral memory
tables as 2-word signed binary data regardless of the Storage Type or Num-
ber of Words settings. (Even when the value is written in hexadecimal with
the $ prefix, it will be displayed in decimal at the Support Tool after the input
is confirmed.)
2. Before operation starts, the contents of the numeral memory tables are are
retained within the PT as 2-word signed binary data regardless of the Stor-
age Type or Number of Words settings.
Numeral Table Memory Data at the Start of Operation
3. When operation is started, the contents of numeral memory tables are writ-
ten to words in the host first. At this point, data is converted and written as
described below according to the Storage Type or Number of Words set-
tings.
Storage
Type
Number
of words
Conversion and storage
BCD 1
The 2-word signed binary data is converted to BCD and
the least significant 4 digits are written. If the value is
negative, F and the least significant 3 digits are written.
BCD 2
The 2-word signed binary data is converted to BCD and
the 8 digits are written. If the value is negative, F and
the least significant 7 digits are written.
Downloaded from Elcodis.com electronic components distributor