Omron NT20, Руководство пользователя

Страница: 62 / 311

41
Using a Memory Unit Section 2-5
3. Press the Japanese or English touch switches to select the display lan-
guage.
The screen shown below is displayed.
Current PT Screen Data, System
The first line: System program name and version for the system program
inside the PT.
The second line: Resource name and version for the resource inside the
PT.
Current PT Screen Data, Screen
The comment for the screen data in the NT20 is displayed here.
Current Memory Unit Screen Data
• System Program:
The first line: System program name and version for the system program
inside the Memory Unit.
The second line: Resource name and version for the resource inside the
Memory Unit.
• Screen Data:
The comment for the screen data in the NT20 is displayed here.
The available transmitting destinations are altered depending on the settings
of the source of transmitting as described in the table below
Reference:
• When transmitting the system program and screen data simultaneously
from the PT to the Memory Unit, the setting of banks is Bank 0: system
program, Bank 1: screen data, and when transmitting them from the
Memory Unit to the PT, either of the following combinations must be used.
Bank 0: system program, Bank 1: other than system program
Bank 0: other than system program, Bank 1: system program
• When writing the system program into the NT20, the type of system pro-
gram inside Memory Unit and the PT model must correspond.
Source Description
[PT]screen
[PT]system
[PT]system/screen [Memory Unit] Bank 0/1 (fixed)
[Memory Unit] Bank 0 • If system program is selected
[PT]system (fixed)
• If screen data is selected
[PT]screen (fixed)
[Memory Unit] Bank 1
[Memory Unit] Bank 0/1 [PT]system/screen (fixed)
[Memory Unit] Bank 0 [Memory Unit] Bank 1