Omron NSH5, Руководство по эксплуатации

Страница: 79 / 120

55
Installation
Section 4-4
Note Always turn OFF the Removable Box's key switch before setting the DIP
switch or the rotary switch.
4-4 Installation
Dimensions
The Removable Box can be installed using any of the following three meth-
ods.
Mounting to a Panel To mount the Removable Box on a panel, use the mounting brackets and tool
(Phillips screwdriver) that are included in the package.
Note (1) Do not allow metal particles to enter the Removable Box while work is be-
ing done on the panel.
(2) The mounting panel must be between 1.6 and 4.8 mm thick.
(3) Secure the mounting brackets with a uniform tightening torque of 0.5 to
0.6 N·m. Use a panel that is clean, undistorted, and strong enough to ad-
equately support the Removable Box.
(4) Do not use the Removable Box in a location that is subject to water or oil.
1. Refer to the cutout dimensions in the following diagram and cut out a hole
for embedding the Removable Box, Then insert the Removable Box from
the front side of the panel.
42.5
50
20.05
66.5
86
94
100
6
65.5
120
6.1
39.5
23
92.5
15.95
23.6
44.8
60.5
41.5
23.5
(143.5)
61.5
+0.
95
+0.5
0
61.5
+0.5
0
95