Omron NSH5, Руководство по эксплуатации

Страница: 67 / 120

43
Memory Cards
Section 3-5
Refer to information on the procedure for recovery and update and to the
Setup Manual for troubleshooting information if an error is displayed when you
use the recovery/update program.
Transferring System
Program Data The System Program is stored under the CX-Designer's install folder (default
location is C:\Program Files\Omron\CX-One\CX-Designer) in folders that are
created for each type and version, as follows:
\SystemBackup\NSH5\V @ _ @ \bank1: NSH5 system program
(“ @ _ @ ” will be replaced by numbers indicating the system program version.
For example “V7_0” is the file for version 7.0.)
To replace a system program, use Windows Explorer or another method to
copy each of the folders for the required system program under \bank1 to the
route directory of the Memory Card.
For details on methods for transferring data from the Memory Card to the PT,
refer to
3-5-4 Transferring Data with Memory Cards .
The system backup folder can be created only if CX-Designer is installed from
the stand-alone CD-ROM. If the CX-Designer is installed from CX-One, rein-
stall the system program by following the procedure for using a recovery/
update program described above.
3-5-4 Transferring Data with Memory Cards
Using a Memory Card with the PT allows system programs (programs
required for operating the PT, such as programs for communications and
fonts) and screen data to be transferred to and from the PT.
There are several types of data transfers, including manual transfers (in which
the data to be transferred and the direction of transfer are selected manually),
downloads (in which data is transferred automatically from the Memory Card
to the PT), uploads (in which data is transferred automatically from the PT to
the Memory Card), and bank specifications (four banks max.). The transfer
method is specified using the System Menu.
Note (1) Before transferring data, check to be sure that the system programs and
screen data types match those in the PT.
(2) Do not perform the following operations while accessing the Memory
Card. The data may be damaged and the Memory Card may need to be
formatted.
• Turning OFF the power to the PT.
• Removing the Memory Card.
Always follow the correct procedure for removing a Memory Card.
If the PT system has been damaged due to the power being turned OFF while
a file is being written, it may not be possible to use normal downloading to
replace a system program. If this situation occurs, refer to
Troubleshooting
below.
Manual Transfer Use screen operations to select the transfer direction (download, upload),
contents (project, project & system program, or system program), and banks.
Use the following procedure to manually transfer data.
1,2,3... 1. Turn ON the power to the PT.
2. Insert the Memory Card into the PT.
3. Simultaneously press two of the four corners of the PT touch panel to dis-
play the System Menu Screen.