Omron NSA12-TX11B, Руководство пользователя

Страница: 88 / 116

Appendix 1 BIOS Setup
Appendix 1-5 Main Menu
Appendix-6
Appendix
Appendix
(1) IDE Channel 0 Master Sub-Menu: IDE Settings
Function Setting Description
Type [Auto]
None
ATAPI Removable
CD-ROM
IDE Removable
Other ATAPI
User
Sets the type of device that is
connected to the system. Normally
select the Auto option.
Total Sectors N/A Displays the total number of sectors.
Maximum Capacity N/A Displays the total capacity.
Multi-Sector Transfers
(Not available if the
Auto option is
selected.)
[16 Sectors] Sets the number of sectors sent per
block.
LBA Mode Control
(Not available if the
Auto option is
selected.)
[Enabled] Enables the LBA mode.
32 Bit I/O [Disabled]
Enabled
Enables or disables 32-bit data transfers
between the CPU and IDE.
Transfer Mode
(Not available if the
Auto option is
selected.)
[FPIO 4/ DMA 2] Selects the method used to transfer
data between the hard disk and system
memory.
Ultra DMA Mode
(Not available if the
Auto option is
selected.)
[Disabled] Sets the ultra DMA mode for
transferring data.
Note: The settings shown in the table are initial values.
The settings shown in the table above are values with an 80-Gbyte hard disk connected.