Omron NSA12-TX11B, Руководство пользователя

Страница: 15 / 116

xv
18. The entire system may stop depending on how the power supply is turned ON
or OFF. Turn ON and OFF the power supply according to the specified
procedures.
19. Always reset the power supply after changing switch settings.
20. Do not perform any of the following operations while the Memory Card is being
accessed.
· Turning OFF the power supply to the NSA-series CPU Box (NSA-CPU @@ )
· Removing the Memory Card
Always follow the specified procedure when removing the Memory Card.
21. Do not press a touch switch with a force greater than 30 N.
22. Do not operate the touch switches with a screwdriver or any other tool.
23. Press touch switches only after confirming the safety of the system.
24. Do not quickly and consecutively press touch switches. The NSA-series
Industrial PC may not be able to read the inputs. Confirm the results of one
input before pressing a touch switch again.
25. Do not accidentally press touch switches when the backlight is not lit or when
the display does not appear. Press touch switches only after confirming the
safety of the system.
26. Do not connect a USB connector to any device that is not applicable.
27. Before connecting the USB connector to a device, check the exterior of the
device and make sure that the device is free of damage.
28. Commercially available USB hubs do not necessarily have the same basic
specifications as the NSA-series Industrial PC. The NSA-series Industrial PC
may not operate properly in environments subject to noise or static electricity.
If you use a USB hub, perform sufficient countermeasures for noise and static
electricity and do not install the USB hub near sources of noise or static
electricity.
29. When installing a Battery, make sure the Battery is the correct model and
install it correctly.
30. Do not disassemble the Battery or short-circuit the terminals.
31. Dispose of any battery that has been dropped on the floor or otherwise
subjected to excessive shock. Batteries that have been subjected to shock may
leak if they are used.
32. Local ordinances sometimes apply to disposal of the NSA-series Industrial PC or
Battery. Dispose of the NSA-series Industrial PC and Battery according to local
ordinances as they apply.
33. Never use volatile solvents, such as paint thinner, benzene, or chemical wipes.
34. The backlight in the NSA-series Industrial PC contains mercury. Do not dispose
of the NSA-series Industrial PC together with other waste to be sent to a
disposal site. Dispose of the NSA-series Industrial PC according to local
ordinances as they apply.