Omron NP Series Скачать руководство пользователя страница 8

Страница: 8 / 100

Precautions for Safe Use

• When unpacking the NP and its peripheral devices, check for any external damage. Shake the

product gently to check for loose/broken parts or any other abnormal sounds.

• Mount the NP onto a panel with a thickness of 1.6 to 2.5mm. Make sure that the panel is clean, not

warped, and offers sufficient mounting strength.

• To keep adequate waterproof and dustproof performance, tighten the mounting brackets equally

with 0.6 to 0.7N

•

m of torque. The front sheet on the panel possibly becomes warped if the torque is

more than the specified limit or not equal.

• Keep metal waste particles from entering the unit, when you work on the panel.

• Do not connect an AC power supply to the power terminals.

• Use a DC power supply with low voltage fluctuation.

• Ground correctly to prevent malfunctions caused by noise.

• Turn OFF the power to the NP before you connect or disconnect a cable.

• Tighten the connector screws after you connect the cable.

• A maximum tensile load of the connectors is 30N. Do not apply a load more than this value.

• Check system safety before you turn the power ON/OFF.

• Do not press touch switches with a force greater than 30N.

• Before pressing a touch switch, check system safety.

• Do not press touch switches in rapid succession. The NP possibly does not accept every input

data. Make sure that each input command is accepted before proceeding to the next command.

• Do not press touch switches when the backlight is not lit or when there is no display.

• Use a twisted pair cable, more than 2mm

in diameter to connect the power.

• Use an OMRON PT-PLC connection cable. Do not use other cables. It possibly causes malfunction.

Содержание NP Series





































































































Результаты поиска

Содержание NP Series

Отзывы:

Бренды по названию

Популярные бренды

Omron NP Series, Руководство по введению

Результаты поиска

Содержание NP Series

Отзывы:

Бренды по названию

Популярные бренды