How to Inhale
13
Correct Use of the Unit
How to Inhale
1
Hold the Main Unit with
your hand and start
inhalation in relaxed
posture.
Slightly slant the Main unit (the
side of Button) towards yourself.
- If medication or slobber collects on the Mesh, the unit stops nebulization. After
removing the Mask Adapter, Inhalation Mask, or Mouthpiece, turn off the power
once and absorb the medication or slobber with new gauze.
(If a medication has high surface activity, it may exude from Mesh holes or the
Bottle Cap, or the medication may leak from the Air Port.)
2
When you finish inhalation, push the Button to turn
off the power.
- When the optional AC Adapter is used, unplug the power plug from
the electric outlet. (Refer to Page 10.)
Absorb the
medication
or slobber.
Immerse the Vibrator in the
medication. If the Vibrator is not
immersed such as when the Main
Unit is placed on a horizontal
surface, the unit may not nebulize.
Medication
Vibrator
Air Port
- If the medication has high surface activity or viscosity such as medication
solubilizing agent or expectorant, the nebulization rate may be reduced.
- If you push the Button and starts the unit while the Vibrator is not immersed in
the medication,
(1) The Battery life may be shortened or the Battery Low Indicator may turn on.
- Slant the Main Unit and check if the Vibrator is immersed in the medication,
then push the Button and start inhalation.
- Use the unit by immersing the Vibrator of the Inhalation Port in the medication.
- Immediately after the medication is nebulized, turn off the power.
(2) A metallic sound may be generated, but it is not a trouble.
Do not poke the Mesh or the Vibrator
with a cotton swab or a pin.
• The Mesh will be damaged and
cannot be used.
EN-p2-20-(NE-U22)-3 3/25/02 4:48 PM Page 13
