10
Changing Scale Between (C°) and (F°).
The Thermometer can display temperature in either Centigrade
or Fahrenheit. To change the scale, follow the instructions below:
1. Start with the thermometer
turned off.
2. Simultaneously, press and hold the
mode and the on/off buttons until
a “Beep” is heard. Release buttons
after the beep. The display will first
show the previously used scale and
then the new one.
3. When the “hourglass” symbol
disappears, the thermometer
is ready to measure by the
selected measurement scale.
NOTE
: If thermometer is turned off before a measurement is taken after the scale
change, the scale will revert to the one last used.
Operation in a Warm Environment
In a warm environment (ambient temperature over 34°C / 93.2°F), the
thermometer may measure in a different operation mode (monitoring mode).
In that case, please follow the instruction below.
1. Following the thermometer premeasurement preparation if you see
a temperature value on the display, instead of a running circle, the
thermometer is operating in the monitoring mode.
2. The “body site” icon and the “C° or F°” indicator will begin to blink
and a short beep will be heard every 10 seconds to indicate that the
measurement is in progress.
3. When a long beep is heard, the process is complete and the temperature
will be displayed in “C” or “F”.
NOTE:
A measurement by the monitoring mode typically takes 2 minutes.
HOW TO TAKE MEASUREMENT
MC-600 English 5/20/02 2:02 PM Page 11
Содержание MC-600
