Omron M12 -, Техническое описание

Страница: 21 / 31

New Product
22
Connector Terminal Boxes
XW3D
Simple Wiring of Sensor Actuators
• Greatly reduce wiring in combination with the Smartclick
XS5.
• Insert the connector and turn 1/8 of a turn to lock the
connectors.
• Higher rated current to enable output applications.
• Use previous M12 screw connectors.
Specifications Materials and Finish
Connection Combinations
Rated current 4 A/port, 12 A/Box (power line)
Rated voltage 10 to 30 VDC
Contact resistance
(connector) 40 m
Ω
max.
(20 mV max., 100 mA max.)
Insulation resistance 1,000 M
Ω
min. (at 500 VDC)
Dielectric strength
(connector) 500 VAC for 1 min
(leakage current: 1 mA max.)
Degree of protection IP67 (IEC60529)
Insertion tolerance 50 times min.
Lock strength Pulling: 100 N/15 s, Twisting: 1 N·m/15 s
Cable holding strength 100 N/15 s
Lock operating force 0.1 N·m to 0.25 N·m
Ambient temperature
range
Operating:
−
25 to 70
°
C
Item Materials/finish
Contacts Brass/nickel base, 0.4-
µ
m gold-plating
Fixtures Nickel-plated zinc alloy
Case PBT resin (UL94V-O), light gray
Bushing Rubber
O-ring Rubber
PCB Glass epoxy board
Sealing resin Urethane resin (UL94V-0)
Cable
UL AWM2464
Signal lines: AWG22
Power and ground lines: AWG18
is a registered trademark of the OMRON Corporation.
: Connected by .
❍
: Connected by screwing.
OMRON model no.
Twist-and-Click
Plug Connectors
M12 Plug Connec-
tors
XS5H, XS5G,
XS5W (plug end),
XS5R (plug end)
XS2H, XS2G,
XS2W (plug end),
XS2R (plug end)
Connector Terminal Box XW3D
❍